kLite QUBE V2 Rear Flashing Bike Light
The kLite QUBE V2 is a vital part of the ULTRA Race kit, powered via USB from the kLite charger or a low-power USB cache battery. It's now 40% brighter with a 180-degree beam width, offering constant or flashing modes controlled by a supplied dongle.
A wiring kit is also available for internal installation, requiring soldering of the USB plug after threading the wire. Using the kLite USB always ON wire loom ensures rear light safety day and night, allowing for automatic start and stop. Standard rear length is about 1 meter, XL rear is approximately 1.6 meters, and internal QUBE is around 1 meter.
Unless otherwise specified the QUBE INTERNAL set up will always default to flashing mode.
Features:
Auto Start / stop with 3min standby time when stopped
Fully waterproof
Ultra low power drain ~20mA
Low power usage means more power for USB recharge when going slow
Oval optic element for wider beam pattern
Flashing or SOLID mode via dongle
Special optics so NOT to blind rider sitting on you wheel
The kLite QUBE V2 is a vital part of the ULTRA Race kit, powered via USB from the kLite charger or a low-power USB cache battery. It's now 40% brighter with a 180-degree beam width, offering constant or flashing modes controlled by a supplied dongle.
A wiring kit is also available for internal installation, requiring soldering of the USB plug after threading the wire. Using the kLite USB always ON wire loom ensures rear light safety day and night, allowing for automatic start and stop. Standard rear length is about 1 meter, XL rear is approximately 1.6 meters, and internal QUBE is around 1 meter.
Unless otherwise specified the QUBE INTERNAL set up will always default to flashing mode.
Features:
Auto Start / stop with 3min standby time when stopped
Fully waterproof
Ultra low power drain ~20mA
Low power usage means more power for USB recharge when going slow
Oval optic element for wider beam pattern
Flashing or SOLID mode via dongle
Special optics so NOT to blind rider sitting on you wheel
The kLite QUBE V2 is a vital part of the ULTRA Race kit, powered via USB from the kLite charger or a low-power USB cache battery. It's now 40% brighter with a 180-degree beam width, offering constant or flashing modes controlled by a supplied dongle.
A wiring kit is also available for internal installation, requiring soldering of the USB plug after threading the wire. Using the kLite USB always ON wire loom ensures rear light safety day and night, allowing for automatic start and stop. Standard rear length is about 1 meter, XL rear is approximately 1.6 meters, and internal QUBE is around 1 meter.
Unless otherwise specified the QUBE INTERNAL set up will always default to flashing mode.
Features:
Auto Start / stop with 3min standby time when stopped
Fully waterproof
Ultra low power drain ~20mA
Low power usage means more power for USB recharge when going slow
Oval optic element for wider beam pattern
Flashing or SOLID mode via dongle
Special optics so NOT to blind rider sitting on you wheel
Pro Service & Install Add-On:
If you are new to running lights and charging devices from a dynamo hub, you could be forgiven for thinking it's a bit hi-tech. There is a lot to consider in terms of how to get the best performance from your shiny new kit and how to install so that it is safe and not going to interfere with your bike packing style. For an extra $75, we will meet* face to face with you and your bike and make sure you understand all the in's and out's and get your KLites installed and running perfectly. It's a big investment so save learning the hard way and let us give you a boost and get you off on the right pedal stroke. You won't regret it.
*Sydney regions only - drop us a note if you’re unsure about location.