kLite Bar Switch/Wire Loom to Dynamo Hub (USB always ON)
Bar switch /wire loom from the kLite Race combo kit: LIGHTS and CHARGE.
This bar switch wire loom connects direct to a SON Dynamo hub for an easy plug and play install. It combines the wiring for both the dynamo light and USB charger to the single hub power plug.
Bar switch /wire loom from the kLite Race combo kit: LIGHTS and CHARGE.
This bar switch wire loom connects direct to a SON Dynamo hub for an easy plug and play install. It combines the wiring for both the dynamo light and USB charger to the single hub power plug.
Bar switch /wire loom from the kLite Race combo kit: LIGHTS and CHARGE.
This bar switch wire loom connects direct to a SON Dynamo hub for an easy plug and play install. It combines the wiring for both the dynamo light and USB charger to the single hub power plug.
Pro Service & Install Add-On:
If you are new to running lights and charging devices from a dynamo hub, you could be forgiven for thinking it's a bit hi-tech. There is a lot to consider in terms of how to get the best performance from your shiny new kit and how to install so that it is safe and not going to interfere with your bike packing style. For an extra $75, we will meet* face to face with you and your bike and make sure you understand all the in's and out's and get your KLites installed and running perfectly. It's a big investment so save learning the hard way and let us give you a boost and get you off on the right pedal stroke. You won't regret it.
*Sydney regions only - drop us a note if you’re unsure about location.
